• Fs2004 - Fsx - Fcs - Discover Europe (other) 2017
• Fs2004 - Fsx - Fcs - Discover Europe (other) Time

Aero AT-3 is a side by side two-seater training and tourism Polish cantilever low-wing monoplane and fixed tricycle landing gear. Designed by Tomasz Antoniewski in 1997, the AT-3 is largely inspired by Pottier P.220S Koala. In response to criticism, particularly in Britain, the basic version has been changed from 28 cm stretched fuselage, empennage deeper modification of the bonnet to facilitate visits by a replacement engine Rotax 912S 100 ch, avionics western parking brake.) to become aT-3 R100.This aircraft modeled by our friend Berju83-Virtual Pilot is his FSX creation but exported for FS2004 with ULE2 (Unlimited Export v2).WARNING: The download is protected against hotlink: username to use is captain, password is alderaban. It's necessary to respect uppercases and lowercas when they are present.AT3-R100-FS2004.zip (15 995.04 Kb) Downloaded 1604 times. A new version v1.00 is ready for downloads, which an aircraft.cfg/turbulent.air adapted!The Druine D31 Turbulent was designed to be performed by amateur builder and this is a single-seater with a lightweight undercarriage cantilever low-wing with a tail wheel.

At propulsion is powered by a 30hp (1200cc) Volkswagen (or a similar engine)An other version for P3D/FSX is ready under ' Downloads - Aircrafts P3D'WARNING: The download is protected against hotlink: account is bordeaux, password is cognac. It's necessary to respect uppercases and lowercas when they are present.abdturbulentv100FS2004.zip (11 611.46 Kb) Downloaded 1929 times. The Demoiselle was the first light aircraft aerospace, created by engineer Alberto Santos-Dumont.It weighed less than 60 kg, his spine was made ​​of bamboo and was 8 feet long, the wing was made of wood covered with pine varnished silk cloth. The prototype project was his No.

19 for the price of kilometers, it has accomplished its first flight November 16, 1907 in Issy-les-Moulineaux, with a two-cylinder engine and horizontal Dutheil Chalmers 18-20 c.WARNING: The download is protected against hotlink: username to use is gear, password is down. It's necessary to respect uppercases and lowercas when they are present.abddemoiselleFS2004.zip (11 507.87 Kb) Downloaded 1313 times. The Consolidated PBY Catalina seaplane is a military designed in the 1930s in the United States. It was widely used during the Second World War, both the U.S. Army by the other allies, performing missions varied.The initial designation of the PBY plane was simply: 'PB' for Patrol Boat, 'Y' is the designation of Consolidated, its constructor. He was nicknamed by the British Catalina, in reference to Santa Catalina Island. Aircraft manufactured in Canada were designated them Canso.This aircraft was first made ​​for ' fly in X-Plane.'

Its creator Olivier Faivre who want to see it in other places had appealed to the FS community to make a portage.My first attempts to bring the sources to Blender GMax date of late 2010. It was a big first for me and after a lot of research and attempts, the transformation process has been developed and is under control now ( harnessed to the Savoia S21).At present, the aircraft is already usable FS2004 via a very special compilation: it is based on an article by William Ortis on the abolition of certain limitations of compilers from Microsoft and that I had translated for www.pilote - virtuel.com.CansoPBY-5ACatalinabeta1.zip (8 514.82 Kb) Downloaded 1435 times. The R.R.A.A is an association which aims to achieve wide 3/4 a replica of.This aircraft was completed after more than 15 years of efforts. Throught this port in FS2004 I wanted to pay tribute to the tenacity and courage of theses men who worked with on this project.First RC version contained a corrupted texture (fuselage.bmp) this RC2 shall correct this error.The texture corrected (zip of 210Ko) available for FS2004 and P3D is in the section ' Downloads - Updates'.An other version P3D is in ' section Downloads - P3D Aircrafts'Mosquito-75rc2FS2004.zip (37 837.24 Kb) Downloaded 967 times. A worthy representative of French aviation, the amateur builders often forgotten but has increased our aircraft in the years 50-60.In this adventure was my first modeling a plane, I was very fortunate to be helped by the manufacturer of the real aircraft: Jean- Claude Afflard.

Although this model is still in Beta 2, the aircraft is perfectly workable and usable under FS2004 FSX/P3D (some worries texture propeller ).New version SOON.MenestrelHN433beta2.zip (10 816.56 Kb) Downloaded 1271 times. Hello,I gave the first beta to but on this first day of January, I wanted also to make a gift to our members, and for all those who would be interested to know the project progress of this famous NC858S.Sorry not to have been unable to do earlier: my 8800 GTX has failed yesterday afternoonVersion is far from finished but I wanted to give away a beta version is already usable and in which many animations are functional.I wanted to make with this airplane a laboratory to test and validate my current knowledge in terms of modeling and XML programming. This is why it could happen again 3 months before seeing a completed version.As there is still no documentation, here are some commands that will allow you to manage:- Personnal Options menu appears: SHIFT + 4. It also appears in the virtual cockpit via a click on the label F- PJDZ- Opening doors windows: SHIFT + E.

Fs2004 - Fsx - Fcs - Discover Europe (other) 2017

+ 2- Opening engine cowlings SHIFT + E. + 3- Opening doors by clicking the mouse in VC (click on the handle or the amount )In the virtual cockpit, the gauges are fully 3D but against the radio panel is not yet functional. It should also change to incorporate both instruments Bendix- King KT 76A and KY97A.I wanted to thank my friends Jean 'Epsilon', Bernard ' Beercan ' and David ' David W.' For their assistance in this project.Best wishes for this new year 2013NC858Sbeta3FS2004.zip (10 872.95 Kb) Downloaded 811 times. The Nieuport 17 was a French biplane fighter aircraft of the First World War. It was developed by Gustave Delage (Nieuport company) and put into service in March 1916.Derived from the Nieuport 12 equipped with a more powerful engine, larger wings and a better structure, the first aircraft were equipped with an engine of 110 hp (82 kW), later with a 130 hp engine (97 kW).

Fs2004 - Fsx - Fcs - Discover Europe (other) Time

It was a plane but very handy lower wings tended to break during extreme maneuvers.From March 1916 Nieuport 17 was used by the French army, but was also adopted by most of the Allied armies. The Canadian ace Billy Bishop was awarded the Victoria Cross while flying a Nieuport 17.The Germans were impressed by the performance of the hunter French, realized very faithful copy: the Siemens-Schuckert DI (fr) which was built in 94 copies.Famous pilot who distinguished themselves on this unit were: Albert Ball, Billy Bishop, Georges Guynemer and Charles Nungesser.WARNING: The download is protected against hotlink. Username to use is wildlife, passord is pinguins.It's necessary to follow the uppercase and lowercase letters when they are present.abd Nieuport 17 v10.zip (83 172.69 Kb) Downloaded 2707 times. This aircraft is from the animated film ' Porco Rosso ' by Hayao Miyazaki. It's called Savoia S21 and is clearly inspired by racing seaplanes 20s.I put my hand on this plane by chance on the X-Plane forum. The X -Plane in itself is very well done. A fact increasingly common for some freeware he meets perfectly the unit of the film.The author has made ​​available the sources Blender, I had the crazy idea to focus on the Microsoft simulators.

Permission having been granted on porting by DDENN Russian author of this gem, I set to work to have this aircraft in FS2004 first.The version that you can already download and golds is a beta (missing virtual cockpit ) but it is already ' flyable ' FS2004 and P3D.SavoiaS21beta.zip (9 805.40 Kb) Downloaded 1139 times. Aero AT-3 is a side by side two-seater training and tourism Polish cantilever low-wing monoplane and fixed tricycle landing gear. Designed by Tomasz Antoniewski in 1997, the AT-3 is largely inspired by Pottier P.220S Koala. In response to criticism, particularly in Britain, the basic version has been changed from 28 cm stretched fuselage, empennage deeper modification of the bonnet to facilitate visits by a replacement engine Rotax 912S 100 ch, avionics western parking brake.) to become aT-3 R100.This aircraft modeled by our friend Berju83-Virtual Pilot is his first creation for FSX but it works without any problem on P3D.WARNING: The download is protected against hotlink: account is captain, password is alderaban.

It's necessary to respect uppercases and lowercas when they are present.AT3-R100HDv01.zip (17 509.50 Kb) Downloaded 3297 times. Wassmer is a company that was located in (now Issoire Aviation). It was the heyday of recreational aviation and gliding French. The first flight out of the consultants is Wassmer WA -40.It is a five-seater aircraft structural metal tube canvas, capable of traveling 1400km to a cruising speed of 260 Km / h it off for the first time on June 8 1959. It has a wingspan of 10 m, a length 8.09 m to a maximum weight of 1200Kg, all powered by a Lycoming O -360 180hp.

There were 168 copies built and as you'll discover with straight fins and arrow.This is our talented friend and friend: ' Berju83' of who made for you the version tested and validated on FSX DX9.Version v1.1 has bring:- pinule on the heading indicator for HDG. (corrected)- function button heading gyro. (corrected)- centering bar of the ball. (corrected)- 2D popup selector for the fuel gauge.

(corrected)- Pressure gauges-intake, and fuel flow. (corrected)- alternator circuit. (corrected)- duplicated plygons in the canopy frame (corrected)- nav lights and strobes still work even if disconnected battery (corrected)- atmospheric engine (corrected).- stall speeds in the checklist.